5 out of 5

HotSpot Wireless Replacement Remote for Training Collar HTST-DDR1

5 out of 5

HotSpot Wireless Replacement Remote for Training Collar HTST-DDR1

$13.95

Description:

Keep the training going with the Hot Spot Pets Model DDR1 & DDR2 Extra Remote Transmitter. It’s designed to work with the Hot Spot Pets Wireless Rechargeable Dog Training System DDR1 and DDR2, to improve behavior through the use of vibration or static shock. You can program this LCD remote to easily and safely determine the best level of vibration or shock for your dog. Just swap out the old transmitter remote and let the training begin, whether indoors or outdoors. The convenient LCD screen makes it simple to see the vibration or shock settings, and the mode, channel, and launch buttons are placed close together for more comfortable use. Plus, it’s ergonomically designed and features LED indicator lights.

 

Key Benefits

  • •Works with the Hot Spot Pets Wireless Rechargeable Dog Training System DDR1 and DDR2.
  • •Just swap out the old transmitter remote and let the training begin, whether indoors or outdoors.
  • •Program the remote to easily and safely determine the best level of vibration or shock for your dog (collar not included).
  • •Convenient LCD screen makes it simple to see vibration or shock settings.
  • •Ergonomic design with buttons placed close together and LED indicator lights.
  • 1 Collar and Receiver?1 LCD Remote
  • 2 Sets of Prongs Small And Large
  • 1 Charger
  • 1 Light Bulb Test Tube
  • 1 Instruction Manual

Connecting the Device Connect the Transmitter with the Collar Receiver:
1. Turn on the Transmitter and choose 1 or 2 channels to encode
2. Lift the Reset part of the rubber cover in the Collar Receiver
3. Use a toothpick or paper click to insert into the Reset HOLE inside the Collar Receiver
4. Press the “Y” button on the Transmitter immediately while you are hearing a beep from the collar
5. The Collar Receiver will beep, it means that the Transmitter has encoded with the collar

Note: If the collar suddenly stop working please follow these steps before returning:
1) Hold down the reset button on the collar until you hear a beep then let go and press the “Y” button on the remote and you will hear another beep.
2) This reset should cause the collar to work properly again

HotSpot Wireless Replacement Remote for Training Collar HTST-DDR1

  • Brands: Hotspot Wireless

Description

Description:

Keep the training going with the Hot Spot Pets Model DDR1 & DDR2 Extra Remote Transmitter. It’s designed to work with the Hot Spot Pets Wireless Rechargeable Dog Training System DDR1 and DDR2, to improve behavior through the use of vibration or static shock. You can program this LCD remote to easily and safely determine the best level of vibration or shock for your dog. Just swap out the old transmitter remote and let the training begin, whether indoors or outdoors. The convenient LCD screen makes it simple to see the vibration or shock settings, and the mode, channel, and launch buttons are placed close together for more comfortable use. Plus, it’s ergonomically designed and features LED indicator lights.

 

Key Benefits

  • •Works with the Hot Spot Pets Wireless Rechargeable Dog Training System DDR1 and DDR2.
  • •Just swap out the old transmitter remote and let the training begin, whether indoors or outdoors.
  • •Program the remote to easily and safely determine the best level of vibration or shock for your dog (collar not included).
  • •Convenient LCD screen makes it simple to see vibration or shock settings.
  • •Ergonomic design with buttons placed close together and LED indicator lights.

Additional information

Weight 0.20 lbs
Brands

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up

HotSpot Wireless Replacement Remote for Training Collar HTST-DDR1

  • Brands: Hotspot Wireless

Description

Description:

Keep the training going with the Hot Spot Pets Model DDR1 & DDR2 Extra Remote Transmitter. It’s designed to work with the Hot Spot Pets Wireless Rechargeable Dog Training System DDR1 and DDR2, to improve behavior through the use of vibration or static shock. You can program this LCD remote to easily and safely determine the best level of vibration or shock for your dog. Just swap out the old transmitter remote and let the training begin, whether indoors or outdoors. The convenient LCD screen makes it simple to see the vibration or shock settings, and the mode, channel, and launch buttons are placed close together for more comfortable use. Plus, it’s ergonomically designed and features LED indicator lights.

 

Key Benefits

  • •Works with the Hot Spot Pets Wireless Rechargeable Dog Training System DDR1 and DDR2.
  • •Just swap out the old transmitter remote and let the training begin, whether indoors or outdoors.
  • •Program the remote to easily and safely determine the best level of vibration or shock for your dog (collar not included).
  • •Convenient LCD screen makes it simple to see vibration or shock settings.
  • •Ergonomic design with buttons placed close together and LED indicator lights.

Includes

  • 1 Collar and Receiver?1 LCD Remote
  • 2 Sets of Prongs Small And Large
  • 1 Charger
  • 1 Light Bulb Test Tube
  • 1 Instruction Manual

Instructions

Connecting the Device Connect the Transmitter with the Collar Receiver:
1. Turn on the Transmitter and choose 1 or 2 channels to encode
2. Lift the Reset part of the rubber cover in the Collar Receiver
3. Use a toothpick or paper click to insert into the Reset HOLE inside the Collar Receiver
4. Press the “Y” button on the Transmitter immediately while you are hearing a beep from the collar
5. The Collar Receiver will beep, it means that the Transmitter has encoded with the collar

Note: If the collar suddenly stop working please follow these steps before returning:
1) Hold down the reset button on the collar until you hear a beep then let go and press the “Y” button on the remote and you will hear another beep.
2) This reset should cause the collar to work properly again

Description

Description:

Keep the training going with the Hot Spot Pets Model DDR1 & DDR2 Extra Remote Transmitter. It’s designed to work with the Hot Spot Pets Wireless Rechargeable Dog Training System DDR1 and DDR2, to improve behavior through the use of vibration or static shock. You can program this LCD remote to easily and safely determine the best level of vibration or shock for your dog. Just swap out the old transmitter remote and let the training begin, whether indoors or outdoors. The convenient LCD screen makes it simple to see the vibration or shock settings, and the mode, channel, and launch buttons are placed close together for more comfortable use. Plus, it’s ergonomically designed and features LED indicator lights.

 

Key Benefits

  • •Works with the Hot Spot Pets Wireless Rechargeable Dog Training System DDR1 and DDR2.
  • •Just swap out the old transmitter remote and let the training begin, whether indoors or outdoors.
  • •Program the remote to easily and safely determine the best level of vibration or shock for your dog (collar not included).
  • •Convenient LCD screen makes it simple to see vibration or shock settings.
  • •Ergonomic design with buttons placed close together and LED indicator lights.

Additional information

Weight 0.20 lbs
Brands

Share your thoughts!

Let us know what you think...

What others are saying

There are no contributions yet.

×

Login

Register

Your personal data will be used to support your experience throughout this website, to manage access to your account, and for other purposes described in our privacy policy.

Continue as a Guest

Don't have an account? Sign Up